中文版

Activated Alumina A104

产品编号: EniSorb-A104
EniSorb-A104 is widely used in HCl purification from syngas and protect adsorbent & catalyst, also could be used in Chloride removal from feed gases, such as naphtha, natural gas, H2, N2, NH3, CO, CO2…etc.
  • 尺寸: Array
  • 静态水吸附: Array
  • 比表面积: Array
  • 抗压强度: Array
  • 堆积密度: Array
  • 包装: Array
  • 最小起订量: Array
  • 样品: Array
  • 描述
    During petrochemical production process, Chloride in feed gas may cause adsorbent & catalyst failure because of poisoning. Meanwhile, it also corrode device and equipment, affect operation of the production. EniSorb-A104 has uniform activity at high/low temperature, good water resistance, the active ingredient and reaction chlorine not easy to transfer.
     
    EniSorb-A104 is widely used in HCl purification from syngas and protect adsorbent & catalyst, also could be used in Chloride removal from feed gases, such as naphtha, natural gas, H2, N2, NH3, CO, CO2…etc.
     
    Technical Properties
    Type EniSorb-A104
    Application Chloride Purification
    Appearance White Beads
    Al2O3 + Additives ≥93
    Bulk Density (g/ml) 0.75~0.80
    Working Conditions End-use Temperature: 5~400
    Working Pressure: ordinary~0.8Mpa
    Airspeed: 1000-3000h-1
    Bed Aspect Ratio: >3
    Chlorine Removal Rate: 99.9%
     Break Though Chlorine Content (%) 50 ≥30
    350 ≥50
    Crushing Strength(N/pc) 2~4mm ≥50
    3~5mm ≥120
    Package 25kg/plastic bag, or 150kg/drum